Publicidad
Idiomas disponibles
Idiomas disponibles
Top tether
anchors points
Vehicle
seat crease
!
WARNING: CONSULT YOUR VEHICLE OWNER'S
MANUAL FOR THE EXACT PLACEMENT OF THESE
ELEMENTS IN YOUR VEHICLE, AND FOR MAXIMUM
LATCH WEIGHT ALLOWANCES PRIOR TO INSTALLATION
AS SOME MANUFACTURERS HAVE LOWER MAXIMUM
WEIGHT ALLOWANCES FOR LATCH USAGE.
INSTALLING WITH LATCH SYSTEM
1. Unhook LATCH from storage
loops. For ease of installation,
extend LATCH to its maximum
length. Ensure the LATCH strap is
NOT twisted and that the LATCH
connectors are facing down ❶.
2. Place the child restraint flush
against a forward-facing vehicle
seat, centered beween the LATCH
anchors. Adjust the recline as
necessary (see "Recline", pg. 29).
3. Fasten LATCH hooks to vehicle
lower anchors ensuring the hooks
are facing downwards ❷. Pull
firmly to be sure that they are
attached. BELT MUST LAY FLAT
AND NOT BE TWISTED.
4. Tighten LATCH by placing your
knee on the child restraint base
and by using your full weight to
push the child restraint down as
you simultaneously pull upwards
on the free end of the adjustment
belt ❸.
31
LATCH
anchor
points
❶
❷
❸
Publicidad
