Publicidad
Idiomas disponibles
Idiomas disponibles
5. Thread both sides of the lap belt
and the lower end of the shoulder
belt UNDER BOTH armrests ❷
and ensure that the lap belt is snug
across child's hips just touching
their thighs and is NOT across
their stomach.
6. Buckle vehicle seat belt into place
❸ and ensure it is secure by gently pulling on it.
!
THE LAP BELT PORTION MUST PASS UNDER
BOTH ARMRESTS.
!
NEVER USE A VEHICLE LAP-ONLY BELT WHEN USING
THIS CHILD RESTRAINT.
!
WARNING: To avoid possible entanglement hazard,
see "Entaglement with vehicle belt", pg. 41.
DUE TO VARYING ANGLES OF VEHICLE SEAT
BELT RETRACTORS, EXCESS SLACK IN THE
VEHICLE BELT SYSTEM MIGHT NOT BE REMOVED
AUTOMATICALLY. Once the lap and shoulder portions
of the seat belt are properly positioned and the
buckle is attached, FEED ANY REMAINING SLACK
OF THE SEAT BELT MANUALLY BACK INTO THE
RETRACTOR TO TIGHTEN THE WHOLE SYSTEM.
BOOSTER WITHOUT BACKREST
See
"Assembling/Unassembling
(pg. 21) for instructions for removing the backrest. Once
backrest is removed, turn recline knob clockwise until
end is reached to retract the base plate on the bottom
of the seat.
1. Place the booster seat firmly against the back of a
forward-facing vehicle seat in a position equipped
with a vehicle lap-and-shoulder belt and headrest.
WARNING!
!
❸
child
restraint"
❶
❷
42
Publicidad
