Publicidad
Idiomas disponibles
Idiomas disponibles
REMOVING/INSTALLING FABRIC SEAT COVER
TO REMOVE
Fabric covers can ONLY be removed once the harness
system has been removed (see "Removing/Installing
harness", pg. 37 - #1-3). THE HARNESS DOES NOT
NEED TO BE REMOVED IN ORDER TO REMOVE THE
BASE FABRIC COVER.
HEADREST:
1. Gently slide fabric downwards off the top of the
headrest.
2. Unhook the elastic loops from each headrest shoulder
belt guide opening on the bottom of
the headrest.
BACKREST:
1. Undo
the
fastener tabs (x2) ❶ along the
bottom sides of the backrest (where
the backrest meets the base).
2. Gently slide fabric cover off the backrest.
3. Remove EPE foam from backrest fabric.
BASE:
1. Undo the fabric hook-and-loop fastener tabs (x2) ❷
from the outside of each side of the seat base (where
armrests meet backrest).
2. Gently slide the fabric cover off the plastic base from
the back of the child restraint towards the front of the
seat. Make sure that recline knob does not get caught
on fabric as you remove seat pad.
TO INSTALL
To reinstall fabric pads, repeat previous steps in reverse
order.
TIP: For ease of fabric pad installations, turn recline knob
counterclockwise to open gap at base of backrest to
facilitate passing the hook and loop tabs through
the gap to secure.
45
fabric
hook-and-loop
❶
❷
Publicidad
