Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING METAL AND PLASTIC HARNESS PARTS:
• Use mild soap and cool water on a damp cloth.
!
NEVER lubricate the buckle. If buckle or harness
adjuster sticks or will not remain tight, check for
foreign objects such as food, dirt, etc. Remove objects
with tweezers and/or clean with a cotton swab. If you
cannot get the harness to remain tight with the buckle
securely locked, DO NOT USE this child restraint. Call
Harmony Juvenile Products to purchase a replacement
harness or buckle.
This restraint is certified for use in aircraft ONLY when
used WITH the harness.
This restraint is NOT CERTIFIED for aircraft use when
used as a booster WITHOUT the harness.
IMPORTANT POINTS TO REMEMBER:
1. Contact your airline before using this child restraint
on the aircraft in order to comply with their
restrictions and regulations.
2. Install this child restraint on an aircraft in the
same way it is installed in an automobile with a
lap belt (see "Installing with Lap-and-Shoulder or
Lap-Only Belt System", pg. 32).
3. Check that the aircraft seat belt holds the child
restraint securely in place at all times. If it does not,
DO NOT use this child restraint.
INSTRUCTION MANUAL STORAGE
Store your instruction manual in the
storage section provided in the base
plate on the bottom of your child
restraint.
47
AIRCRAFT INSTALLATION
Publicidad
