Publicidad
Idiomas disponibles
Idiomas disponibles
2. Thread the vehicle seat belt
through the belt slot opening and
out the other side. See illustrations
for proper routing path of Lap-
and-Shoulder Belt ❷ or Lap-Only
Belt ❸.
3. Buckle the vehicle seat belt. The
vehicle seat belt MUST NOT be
twisted.
To engage vehicle seat belt retractor:
4. Pull out the full length of the seat
belt (until you cannot pull out
any more slack). This locks the
retractor.
5. Tighten vehicle seat belt by placing
your knee on the seat base and by
using your full weight to push the
child restraint down ❹ as you
simultaneously release the extra
belt length until seat belt is taught
and has no slack ❺.
6. The locked seat belt retractor will
not allow you to add any length to the belt until you
unbuckle the seat belt.
For more information on how to tighten the belt for
your seat belt system, see your vehicle owner's manual.
7. Secure the top of the child restraint using the top
tether strap (see section "Using top tether", pg. 25).
33
❷
❸
❺
❹
Publicidad
