Harmony 3-IN-1 DELUXE CAR SEAT Manual De Instrucciones página 33

T IP: If you are not able to tighten
LATCH using the method above, try
pulling the LATCH strap up through
the belt path (under the fabric) ❹,
then tighten.
5. Should you need to loosen the
LATCH, push the LATCH release
button ❺.
! WARNING: NEVER put two LATCH
connectors on one vehicle LATCH
anchor unless specifically allowed
by the manufacturer ❻.
6. Secure the top of the child
restraint using the top tether strap
(see "Using top tether", pg. 25).
!
Conduct a safety check for a secure
installation (see "Installation safety
check", pg. 34). Perform this test
every time you drive with your
child and whenever you readjust the child restraint as
your child grows.
INSTALLING WITH LAP-AND-SHOULDER
! WARNING: LATCH must be stored
when using the vehicle belt. Clip
both LATCH hooks to the fabric
loops on each side of the backrest
❶.
1. Place the child restraint flush
against the back of a forward-
facing vehicle seat. Adjust the recline as necessary
(see "Recline", pg. 29).
OR LAP-ONLY BELT SYSTEM
❹
❻
❺
❶
32