Publicidad
Idiomas disponibles
Idiomas disponibles
ENTANGLEMENT WITH VEHICLE BELT
!
WARNING: To avoid possible entanglement and
choking with your vehicle's shoulder belts, Harmony
Juvenile Products recommends that the following
precautions are taken when installing your booster
seat:
1. Pull the shoulder portion of the vehicle seat belt all
the way out until the retractor locks.
2. SLOWLY let the vehicle seat belt retract until it is snug
against your child.
3. ENSURE that the belts do not press on the child's flesh
or push the child's body into an unnatural position.
4. Do the same for all unused vehicle seat belts.
!
Teach your child that vehicle seat belts are not toys and
should NEVER be played with, regardless of whether
the car is in motion or not.
!
ALWAYS be aware of what your children are doing in
the back seat.
1. Place booster seat firmly against the back of a
forward-facing vehicle seat. The vehicle seat MUST
be equipped with a lap-and-shoulder belt. Booster
must be level, stable and not rock side-to-side
(see "Choosing an appropriate vehicle seat location",
pg. 12).
2. Place child in the booster seat with child's back flat
against the back of the booster seat.
3. Adjust headrest height so that the bottom of the
headrest is even with the top of the child's shoulders.
4. Thread the shoulder belt portion of the 3-point lap-
and-shoulder belt through the headrest shoulder
belt guide ❶ and ensure that the shoulder belt lies
across child's shoulder and chest, and NOT across
child's face or neck.
41
SECURING CHILD AND
BOOSTER SEAT IN VEHICLE
Publicidad
