Publicidad
Idiomas disponibles
Idiomas disponibles
Booster must be level, stable and not rock side-
to-side (see "Choosing an appropriate vehicle seat
location", pg. 12).
2. Have your child sit on the booster seat with their back
flat against the vehicle seat.
3. Thread both sides of the lap belt and
the lower end of the shoulder belt
UNDER BOTH armrests as indicated
and ensure that the lap belt is snug
across child's hips just touching
their thighs and is NOT across their
stomach.
4. Buckle vehicle seat belt into place and ensure it is
secure by gently pulling on it.
!
THE LAP BELT PORTION MUST PASS UNDER BOTH
ARMRESTS.
!
NEVER USE A VEHICLE LAP-ONLY BELT WHEN
USING THIS CHILD RESTRAINT.
!
WARNING: To avoid possible entanglement hazard,
see "Entaglement with vehicle belt", pg. 41.
INSTALLING SHOULDER BELT GUIDE
1. Locate the shoulder belt guide strap and screw in the
storage pouch.
2. Using
a
attach belt guide strap to booster
seat base by screwing into the
pre-drilled hole in the back of the
seat base.
!
Before tightening screw, make sure belt strap is
pointing upwards and that the RED belt guide opening
is facing forward. DO NOT overtighten screw.
43
Phillips
screwdriver,
Pilot
hole
Base
plate
Publicidad
