1. oVerVIeW
1.1 seat parts description
a. Headrest height regulator.
B. Headrest.
c. seat.
d. Harness straps.
e. shoulder pads.
F. Harness buckle.
G. Buckle pad.
1.2 Isofix base parts description
M. rebound bar.
n. rebound bar unlocking button.
o. Isofix connectors.
P. Isofix system unlocking button.
Q. Isofix arms lever.
r. support leg adjustment button.
s. support leg.
WARNING:
Make sure all above components are correctly fixed before driving.
26
H. reducer mattress pad.
I. Harness adjustment button.
J. Harness adjustment strap.
k. seat recline lever.
l. Instruction manual storage bin.
T. support leg green indicator.
u. Base anchoring points locking
button.
V. locking button.
W. seat anchoring points.
X. Isofix arms insert guides.
2. VeHIcle InsTallaTIon PoInTs
WHere:
In the vehicle rear seats
Please, do noT install the safety seat in forward seats except for the
following cases:
1. Whenever the vehicle does not count with rear seats.
2. When all rear seats are already occupied by children exceeding
135 cm height.
3. When it is not possible to install all child restraints systems in
the rear seats.
*note: according to spanish legislation for child restraint systems (royal Decree 667/2015).
HoW:
GROUP 0+/1 • Install rearward facing.
GROUP 1 • Install forward facing.
on seats with:
IsoFIX anchors (between the seat and the backrest).
notice:
the child seat must only be used in this seat IF it has Isofix connectors.
3. PrIor Tasks
Preparing the Isofix base
(M)
1. Insert the rebound bar
into the base until you hear a click as described in fig.
3.1
2. Pull out the support leg, which can be found beneath the isofix base (fig.3.2)
3. If your vehicle is not equipped with the isofix insert guides as standard, attach
the two insert guides included with the child safety seat (fig. 3.3).
(Q)
4. Pull the Isofix arms lever
to extend the arms (fig. 3.4 and 3.5).
1
2
27