Removing The Cover; Cleaning And Maintenance - Babyauto rückko 01 Manual De Uso

2. line up the green points of the seat with the green points of the isofix base and install
the seat on the anchoring points
3. Pull the seat recline lever (k) to adjust the seat to recline position 1 (fig. 7.2). later,
you will be able to select positions 2 or 3 when your child is travelling asleep.
4. Press the red button "press" (V)
the button "push" outward to close and lock the anchoring points. the red button
"press" will remain protruding, displaying the green "lock" indicator, which indicates
that the anchoring points are securely fastened (fig. 7.4).
8. unInsTallInG THe cHIld seaT
1. Press the red button "press"
letting go, press the button "push" inward to open and unlock the anchoring points.
the red button "press" will remain inside the frame. the green "lock" indicator will
remain hidden, indicating that the anchoring points are open (fig. 8.1).
2. Press and draw back the isofix system unlocking button
arms. the button will go from partially green to completely red, indicating that it is
open (fig. 8.3).
3. Partially pull out the base and fold up the support leg. Press the adjuster button
as you pull up the leg with your other hand (fig. 8.5 and 8.6).
4. Fold up the leg (fig. 8.7).
5. Drawing towards you, pull in the two isofix arms (fig. 8.8).
6. Press the button (n) to release the rebound bar. remove it and store it for future
use (fig. 8.9).

9. reMoVInG THe coVer

1. remove the reducer mattress pad.
2. carefully remove the fabric cover from the headrest.
3. unfasten the Velcro straps from the textile part of the back.
4. unfasten the two hooks at the rear, which attach the fabric cover to the plastic seat base.
30
(W) facing towards the direction of travel (fig.7.1).
situated on the front of the base, which will push
(V) situated on the front of the base, and, without
(P) to unlatch the isofix
5. carefully remove the part of the cover around the harness adjuster button.
6. remove the seat cover.
7. open the lid on the rear of the seat and unfasten the connector that links the
shoulder pad straps. remove the shoulder pads.

10. cleanInG and MaInTenance

1. to wash belts and plastic parts, use neutral detergent and warm water.
2. Ensure that soap does not enter inside the buckle or metal pieces.
3. Do not use chemical products or bleach on any part of the child seat.
WasHInG InsTrucTIons:
- The cover can be removed and
washed at 30 °c. It should only be
air-dried.
- Machine wash, cold.
- do not use bleach.
If you have any doubts about using or installing this product, or you need a replacement part,
please get in touch with our customer service team.
(r)
11. GuaranTee
1. The warranty does not cover defects or failures caused by inappropriate use or non-
compliance with the installation and maintenance safety standards described in the
instruction guides provided with the products.
2. Total repair of original defects is guaranteed free of charge.
3. If repairs carried out are not satisfactory and the product does not meet the optimal
conditions for fulfilling its intended use, the holder of the warranty shall have the right to
substitute the acquired article with another one of similar characteristics, or have the price
paid returned, in the 2 years following the date of purchase.
4. The warranty shall be automatically considered void if the article acquired has been
repaired or if an attempt has been made to repair it by an individual that is not authorised
by our company.
- dry clean, any solvent except
30 °C
trichlorethylene.
- do not use a dryer.
- do not iron.
31