CASO DESIGN ProAdvanced E1 Manual Del Usuario página 30

DE
3.2 Delivery scope and transport inspection
EN
The device includes the following components:
FR
• Single built-in induction hob ProAdvanced E1
• Self-adhesive sealing tape on one side
IT
• Testing magnet
• Operating manual
ES
PLEASE NOTE
NL

Examine the shipment to ensure the unit and manual are included and inspect the
RUS
unit for any visible damage.

Immediately notify the carrier and/or the supplier about an incomplete shipment
SE
or any damage as a result of inadequate packaging or mishandling.
PT
3.3 Unpacking
Carefully remove the packaging material and unit from the carton. Remove the
protective fi lm from the unit.
PLEASE NOTE

If possible, keep the original packaging for the duration of the guarantee period in
the event a return is necessary.
3.4 Setup location requirements
In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfi l the following prerequisites:
•
The unit is intended for free-standing use and installation.
•
If the unit is used free-standing, it must be placed on a solid, fl at, level and heat-re-
sistant surface with suffi cient load-bearing capacity for the unit and the expected
heaviest food to be cooked.
•
The induction hob must not be operated on a base containing iron or steel as this can
become very hot.
•
Select an installation location where children cannot reach the appliance's hot surface.
•
The wall behind the appliance and the zone above the appliance must be heat-resis-
tant. The distance between the hob and the cabinets above it must be at least 760 mm.
•
Do not set up the device in a hot, wet or extremely damp environment or near fl am-
mable material.
•
Do not set up the induction cooktop in the vicinity of appliance and objects which
react sensitively to magnetic fi elds (e.g.: Radios, televisions, cassette recorders, etc.).
•
To operate correctly, the appliance requires a suffi cient fl ow of air.
•
The cool air is drawn in by the underside of the appliance. Do not cover or block any
of the appliance's openings.
•
The electrical socket must be easily accessible so that the power lead can be discon-
nected easily, in the case of an emergency.
•
The installation and assembly of this device in non-stationary setup locations (e.g.
on ships) must be carried out by specialist companies / electricians, provided they
guarantee the prerequisites for the safe use of this device.
30 CASO ProAdvanced E1