Descargar Imprimir esta página

CASO DESIGN ProAdvanced E1 Manual Del Usuario página 35

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 78
PLEASE NOTE
Using the induction-compatible pots of some manufacturers can lead to the occur-
rence of noises that are due to the design of these pots.
Please also adhere to the following instructions for using suitable cookware:
PLEASE NOTE
Only use pots with an induction-compatible base.
The maximum permissible weight of the pot plus its contents must not exceed 6 kg.
Be careful when using hollow-walled simmer pots. Pots of this type can boil dry
unnoticed. This leads to damage to the pot and hob.
5.3 Safety Instructions
WARNING
Do not leave the appliance unattended during operation.
Do not move the appliance during operation or with hot cookware on the hot
plate.
Ensure that the cookware is properly centred on the hob. It must not be positioned
on the control panel or on the frame.
In order to prevent overheating do not place any aluminium foil or metal panels on
the appliance surface.
Do not touch the hot surface of the ceramic hob.
Although the induction cooktop itself does not produce any heat during the co-
oking process, the temperature of the cookware does heat up the hob.
Keep the hob and the underside of the pot clean and dry at all times. If liquid gets
between the base of the pot and the hob, this liquid can vaporise and the resulting
pressure can cause the pot to jump into the air, with a resulting risk of injury.
Switch the appliance off after use. This avoids unnecessary use of energy, and ensu-
res your safety.
5.4 Operating the Appliance
5.4.1 Switching On
1.
Plug in the mains plug.
2.
An acoustic signal sounds, and the unit is in standby mode. The temperature of the
cooker plate surface displayed: is the temperature of the surface of the induction
cooker lower than 50 °C, the display shows „L". When the temperature of the cooker
plate surface is over 50 °C, it is displaying „H".
3.
Place suitable cookware with the food to be cooked/fried centred on the hob (Ø
120 mm – 240 mm).
4.
Press the "On/Standby" button to switch on the unit. An acoustic signal sounds, and
the "Level" and "Temp" indicator lights fl ash.
CASO ProAdvanced E1
DE
EN
FR
IT
ES
NL
RUS
SE
PT
35

Publicidad

loading

Este manual también es adecuado para:

3043