Appendix; Typical Printouts From Mettler Toledo Rs-P42 And Lc-P45 Printers - Mettler Toledo AL Serie Instrucciones De Manejo

Appendix

30
7 Appendix

7.1 Typical printouts from METTLER TOLEDO RS-P42 and LC-P45 printers

Function: Adjusting
-BALANCE CALIBRATION-
Date: ................
Time: ................
METTLER TOLEDO
Type: PL1502
SNR: 1120053108
SW: 1.0
Weight ID: ............
Weight: 1000.00 g
External Cal. done
Signature:
........................
--------- END ---------
Function: Piece counting
Printout with reference
weight
---- PIECE COUNTING ----
APW: 0.99 g
Out of: 10 PCS
27.00 g
27 PCS
Function: Percent weighing
----- % - WEIGHING -----
Ref. 10.008 g
100.00 %
60.01 g
599.59 %
Function: Dynamic
weighing
--- DYNAMIC WEIGHING ---
Weigh Time: 2 s
DW 49.999 g
Function: Plus-minus
weighing
----- +/- WEIGHING -----
Nominal: 9.68 g
+/-Tol: 1.04 %
16.21 g
above range
Function: Free factor
- FREE FACTOR WEIGHING -
Formula: factor * weight
Factor: 12.73
Step: 0.01
49.94 #
Function: List
Printout of the current
balance settings
--- LIST OF SETTINGS ---
Date: .................
Time: .................
METTLER TOLEDO
Type: PL601-S
SNR: 1120053108
SW: 1.0
TDNR: 7.17.1.286.108
------------------------
Application:
Count
------------------------
Weighing Parameters:
Weighing Mode Standard
Unit 1
Unit 2 mg
A.Zero On
------------------------
System Parameters:
Auto off 10 min
------------------------
Peripheral Devices:
P.Device Printer
Baud 2400
Bit/Parity 7b-even
Handshake Off
P.Device Host
Sendmode Off
Baud 9600
Bit/Parity 8b-no
Handshake Soft
--------- END ----------
Function: Verification of
the calibration
(adjustment) with external
weight.
Only possible with LC-P45.
Function is triggered via the
printer.
----- BALANCE TEST -----
04.07.2002
METTLER TOLEDO
Type:
SNR: 1120053108
SW:
Weight ID: .............
Target : ...............
Actual : .......199.98 g
Diff : ...............
External test done
Signature:
........................
g --------- END ----------
Function: Statistics
Only possible with LC-P45.
Function is triggered via the
printer.
04.07.2002
ID
SNR: 1118015657
1 1100.15 g
2 1600.10 g
3 1699.95 g
n
x 1466.733 g
s 321.372 g
srel 21.91 %
min. 1100.15 g
max. 1699.95 g
dif. 599.80 g
--------- END ----------
Function: Multiplier
Only possible with LC-P45.
Function is triggered via the
printer.
04.07.2002
ID
SNR: 1118015657
Factor 1.65
588.43 g
* 970.9095
Notes
With the RS-P42 the date
and time must be entered by
hand at the top of the report
(see specimen printout for
the "Adjusting" function).
With the LC-P45 the date
and time are recorded auto-
09:52:12
matically (see specimen
printout for the "Statistics"
PL1502
function).
1.0
The operating instructions
for the LC-P45 include a
description of the functions
that are triggered via that
printer.
The RS-P42 prints all reports
in English. This applies also
to the LC-P45 reports that
originate in the balance. In
the case of reports triggered
by the LC-P45, the following
languages may be selected:
German, English, French,
Spanish or Italian.
10:44:07
666
3
08:23:22
242