Getting To Know L/L-S Balances; General (Types Of Construction, Balance Features); Layout Of Balances - Mettler Toledo AL Serie Instrucciones De Manejo

Getting to know L/L-S balances line
4
1 Getting to know L/L-S balances line

1.1 General (Types of construction, Balance features)

Standard construction
AL
Compact construction
PL-S
PL202-S

1.2 Layout of balances

6
2
3 1
13
7
12
9
14 11
10
12
11
10 9
7
Several types of construction – uniform operation
• The L/L-S balance line ranges from high-resolution analytical balances (AL) with
a readability of 0.1 mg through to precision balances (PL/PL-S) with a
readability of 0.001 g to 1 g. The weighing ranges extend from 51 g to 6.1 kg.
• The operation of all theses balances is identical.
Balance features
• In addition to basic operations such as weighing, taring and adjusting (calibra-
tion) miscellaneous functions such as "Piece counting", "Percent weighing",
"Dynamic weighing", "+/- Weighing" or "Free factor" can be activated.
• Several L/L-S balances are fitted with a glass draft shield in the factory; with other
PL
models a draft shield is available as an optional extra.
Notes
• Models of Line AL and PL-S balances are available as certified versions. Please
ask your METTLER TOLEDO dealer for details.
• If you wish to build on what you have learned about weighing in these operating
instructions, you will find valuable tips in booklet Order No. 720906 "Weighing
the right way".
1 Keys
2 Display
3 Model plate with the following data:
"Max": maximum capacity
"d":
"Min":
"e":
5
8
4 Draft shield element (not on all models)
5 Weighing pan
6 Draft shield (supplied as standard with models with a readability of 0.1 mg and
4
1 mg)
7 Leveling feet (not on all models)
8 Hanger opening for weighing below the balance (underside of balance)
9 AC adapter socket
10 Optional RS232C interface
11 Lug for optional antitheft device
5
12 Leveling control (not on all models)
13 Compartment for batteries (only in compact models equipped with the
AccuModule option) in underside of balance
14 Optional interface for special PL-S auxiliary display (only for compact
construction)
8
Keys and display are identical for all L/L-S balances.
readability
minimum capacity (recommended minimum load; only relevant for
certified balances)
verification scale interval (smallest display increment tested during
certification; only relevant for certified balances)