Nuova Simonelli CAFFETTERIA ITALIANA Instrucciones De Manejo página 41

Before starting to use the appliance, the
operator must be sure to have read and
understood the safety instructions contai-
ned in this booklet.
SWITCHING ON: By pressing the
key an auto diagnosis cycle will be started
up at the end of which (when the machine
is cold this cycle will last up to 20/25 minu-
tes), the display will read MACHINE
READY.
In case the display should read COFFEE
BOILER FILLING, a manual coffee boiler
filling cycle must be activated by pressing
button . The words COFFEE BOI-
LER FILLING CYCLE will appear and the
needed water level within the coffee boiler
will be reached.
NOTE.: In case the auto diagnosis
should indicate error or malfunction,
call the assistance centre; the operator
should not intervene.
SWITCHING OFF: By pressing the
button for at least one second the
machine will turn off and the display will
read OFF.
1 Small coffee, 2 small coffees,
1 long coffee, 2 long coffees,
Carafe/Jug, Carafe/Jug,
1 Cappuccino (version XS only)
2 Cappuccino (version XS only)
USE AND PROGRAMMING
1 Caffè Latte (version XS only)
2 Caffè Latte (version XS only)
1 hot milk (version XS only)
2 hot milk (version XS only)
DECA: Decaffeinated coffee
- The display will read: OPEN DECA
DOOR, then open the small door on the
cup holder board between the two cof-
fee container.
- On opening the small door the message
POUR COFFEE POWDER AND
CLOSE DECA will be displayed; at this
point, pour in the dose of decaffeinated
coffee powder and close the door.
- At this point the message SELECT A
DECA DOSE will appear, select one of
the two buttons
Continuous delivery: this func-
tion enables automatic delivery of the
amount of coffees set and allows you to
vary the programming (minimum 2, maxi-
mum 99):
- Press the CONTINUOUS DELIVERY
button; the number of coffees to
be delivered will be displayed and can be
changed by pressing buttons
(NOTE: if after changing the number of
deliveries desired the ENTER button is
pressed, the new desired amount of cof-
fee deliveries will be memorized)
- Buttons
select the grinder to use for the conti-
nuous doses; the associated led will be
turned on.
- At this point press one of the flashing
buttons:
(NOTE: If you want to stop the conti-
nuous delivery function re-press the
button and the delivery in pro-
gress will be arrested. If, on the other
hand, the STOP button is pressed, the
delivery in progress will be arrested and
the continuous cycle will be stopped.)
STOP: This allows you to stop the delivery
of coffee, cappuccino, caffè latte and milk
ahead of time.
is for the delivery of hot water and, when
pressed again, the function is interrupted.
(NOTE: the STOP button stops the dose
that is being delivered.)
,
chosen during the delivery button configu-
ration phase, these buttons allow you to
select the coffee grinder to utilize during
the various kinds of deliveries. The selec-
and .
tion has to be carried out prior to the deli-
very selection.
and allow you to
HOT WATER: This button
Regardless of the grinder
39