Nuova Simonelli CAFFETTERIA ITALIANA Instrucciones De Manejo página 51

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

STANDARD PROGRAMMING
The function allows the configuration of
the machine with certain pre-defined para-
meters. In this mode the type of parame-
ter to be preset is selected in the planning
phase.
In the installation-standard programming
mode, the following options are available:
• water doses
• extra water doses
• grinding times
• milk times
• milk washing cycle times
Buttons
and
are set up to select the
options listed above.
The ENTER button is set up to access the
function selected.
The RESET button takes you back to the
previous menu.
Water doses
The function allows the configuration of
the doses of water for all the buttons with
the values pre-defined in the planning
phase
At the end of the programming with the
standard values, the machine returns to
the previous menu.
Grinding times
The function allows the configuration of
the grinding times for all the buttons with
the predefined values in the planning
phase.
At the end of the programming with the
standard values, the machine returns to
the previous menu STANDARD PRO-
GRAMMING - GRINDING TIMES.
Extra water doses
The function allows the configuration of
the doses of extra water for all the buttons
with the predefined values in the planning
phase.
At the end of the programming with the
standard values the machine returns to
the previous menu STANDARD PRO-
GRAMMING - DOSES OF EXTRA
WATER.
Milk times
The function allows the configuration of
the milk times for all the buttons with the
predefined values in the planning phase.
At the end of the programming with the
standard values the machine returns to
the previous menu STANDARD PRO-
GRAMMING-MILK TIMES.
Milk washing cycle times
The function allows the configuration of
the milk washing cycle times for all the
buttons with the predefined values in the
planning phase.
At the end of the programming with the
standard values the machine returns to
the previous menu STANDARD PRO-
GRAMMING-MILK WASHING CYCLE
TIMES.
PROGRAMMING WITH
A COMPUTER
The automatic machine is capable of con-
ducting a dialogue with a personal compu-
ter with which the following operations can
be carried out:
• certain service tests
• reading and programming of the fol-
lowing configuration parameters of the
machine:
• operating temperature (10 - 30
degrees are the set point)
• selection of the control keys: 2 or 15
• turning on/off the timekeeping clock
• resetting absolute totals to zero
(group cycles)
• washing times (pause, activation of
solenoid valve)
• total alarm counter
• reading and resetting of dose totals
• reading and resetting of the alarm
record
The connection between the electronic
control unit and the personal computer is
effected by means of an RS232 in the
computer.
ALARMS AND TIME OUT
All alarm signals will provide a visualized
message on the LCD display and an
on/off buzzer sound alarm (except those
alarms regarding full coffee grounds
drawer, blocked grounds drawer, door
open, anti-scaling maintenance and
alarm).
The reset of the alarms involves the return
to the SWITCHING ON AND STARTING
UP procedure (temperature, levels,
VACUUM CYCLE ).
49

Publicidad

Tabla de contenido
loading

Tabla de contenido