Stiga MPST 84 Li 48 V1/V2 Manual De Instrucciones página 70

ENGLISH - Translation of the original instructions
The owner's manuals are available:
▷ on the stiga.com website
▷ by scanning the QR code
ATTENTION: READ THIS MANUAL CAREFULLY BEFORE USING THE MACHINE.
Keep safe for future use.
NOTE The purpose of this document is to provide a sim-
ple, paper-based guide for safe operation and maintenance of
the machine.
For more detailed information, download the complete digital
owner's manuals.
1. SAFETY REGULATIONS
1.1. TRAINING
Become acquainted with the controls and the
proper use of the machine. Learn how to stop
the engine quickly. Failure to follow the warnings
and instructions may result in fire and/or serious
injury.
• Never allow the machine to be used by children or
individuals who are not familiar with the instructions. Local
laws may establish a minimum age for users.
• Never use the machine if the user is tired or unwell, or has
taken medication, drugs, alcohol or substances that impair
reflexes and concentration.
• Remember that the operator or user is responsible for
accidents and unexpected events that can occur to other
people or property. It is the user's responsibility to assess
the potential risk of the area where work is to be carried
out and to take all the necessary precautions to ensure
his own safety and that of others, particularly on slopes
or rough, slippery and unstable ground.
• If the machine is sold or lent to others, make sure that
the operator looks over the user instructions contained
in this manual.
1.2. PRELIMINARY OPERATIONS
Personal Protective Equipment (PPE)
• Always wear suitable work attire, hard-wearing safety
footwear with non-slip soles and long trousers. Do not
operate the machine barefoot or wearing open sandals.
Wear hearing protection devices.
• Wear protective gloves whenever your hands are at risk.
• Never wear scarves, shirts, necklaces, bracelets, loose
flowing clothing, laces or ties or any hanging or flapping
accessory that could catch in the machine or in any objects
or materials in the work area.
• Tie your hair back if it is long.
Work / Machine Area
• Thoroughly inspect the entire work area and remove
anything that could be thrown by the machine or damage
the cutting means/rotating units (stones, branches, iron
wire, bones, etc.).
1.3. DURING OPERATION
• Do not use the machine in environments that pose the risk
of explosion, in the presence of flammable liquids, gases
or powders. Power tools create sparks which may ignite
the dust or fumes.
• Do not expose the machine to rain or wet environments.
Water entering a power tool will increase the risk of
electric shock.
• Work only in daylight or with good artificial light in good
visibility conditions.
• Avoid working with wet grass, in the rain and when there
is a risk of a thunderstorm, especially lightening.
• Keep people, children and animals away from the work
area. Children must be supervised by another adult.
• Pay careful attention to uneven ground (hills, dips), slopes,
hidden hazards and obstacles that could limit visibility.
• Be very careful near ravines, ditches or embankments. The
machine could overturn if a wheel slides over the edge or
if the earth gives way.
• Always mow across a slope and never up and down it,
being very careful when changing direction, making sure
you have firm footage and that the wheels do not hit any
obstacles (such as stones, branches, roots, etc.) that
may cause the machine to slide sideways or make you
lose control of it.
• The machine must not be used on slopes above 10°,
regardless of the mowing direction.
• Stop the cutting means when crossing non-grassy surfaces.
• Always keep hands and feet away from the cutting means,
when starting and when using the machine.
• Keep away from the discharge opening.
• Never use the machine with damaged, missing or
incorrectly positioned guards (grass catcher, rear unload
guard).
• Never disengage, deactivate, remove or tamper with the
safety systems/micro switches installed.
• Pay close attention on sloping ground which requires
special care to prevent overturning or loss of control of
the machine. The main reasons for loss of control are:
- Insufficient wheel grip.
- Excessive speed.
- Sharp changes of direction.
- Inadequate braking.
- Type of machine unsuitable for its task.
- Lack of awareness of the effect of ground conditions.
- Using the machine for towing.
IMPORTANT The machines covered in this manual are not
designed for use as towing vehicles
• Look out for traffic when using the machine near the road.
• Release the cutting means, stop the engine and remove
the ignition key, making sure that all moving parts have
come to a complete stop:
- When transporting the machine;
- Whenever the machine is left unattended;
- Before removing the blockages or unclogging the
discharge conveyor;
- Before checking, cleaning or working on the machine;
EN - 1
Download full manual
stiga.com