+GF+ RPC D/PID Manual De Instrucciones página 17

Operating Instructions
4.2 Pivoting range
The swivel movement of the collared shaft must take place within the displacement transducer rotation range of 180°.
► To ensure that the flattened displacement transducer works with optimal resolution, the pivoting range must be at least 30°.
► The scale printed on the lever is not relevant.
3
NOTE!
Maximum rotation range!
The maximum rotation range of the displacement transducer is 180°. If the RPC positioner is operated outside this range, material
damage may occur.
► Type RPC Move positioner only within the specified pivoting range.
2
2
No. Designation
1 Ideal pivoting range
(min. 30° / max. 180°)
2 Maximum pivoting range
3 Flattened shaft
1
Type RPC D/PID positioner
17