Starting The Lighting Column; Implementation For Installation - SDMO RL6-1b Manual De Uso Y Mantenimiento

5. Starting the lighting column

5.1. Implementation for installation

Before any operation, ensure that the lighting column is switched off.
The electrical connection between the lighting column's lights and control panel uses a 9G1.5 mm² spiral cable.
When using the lighting column in severe weather conditions and at very high or low temperatures, check the condition and position of
the spiral cable.
Position the lights, tilting them manually using the positioning handle (fig. 5.1, no. 1).Then lock them using the handle (fig. 5.1, no. 2).
Do not position the lighting column beneath overhead electric cables.
Stay well away from the machine when the column is being manoeuvred
Important
1
Figure 5.1 – Adjusting the lights
58/372
2