Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Left Rear
Meaning
Display (2RL)
U3
Volume for signal tones
U4
Display brightness
U5
Timer animation
U6
Permanent pot detection
U7
Behaviour when the Timer expires
SERVICE MENU
The service menu is for service purposes only, except for certain
"energy management" functions such as the maximum Power Level,
which can be adjusted from the User Menu but is set by the Service
Menu.
Accessing the service menu
When the hob is powered up, the symbol
maximum of 2 minutes. This menu can be accessed whenever
power is physically removed from the hob.
The special function key
• Press the key
without releasing it.
• Press each cooking zone display (2) counter-clockwise, as
shown in Fig. 28, starting from the front right, 1-2-3-4 (1-
>2FR... 2->2RR... 3->2RL... 4->2FL).
18
is active for a
is flashing.
Fig. 28
Variable
Front Left Display
(2FL) (Value Format)
Yes
0, 1, 2, 3
(U3 DEFAULT= 3)
Yes
0, 1, 2, 3, 4, 5, 6, 7,
8, 9
(U4 DEFAULT= 0)
Yes
0, 1
(U5 DEFAULT= 1)
No
Yes
0, 1, 2
• Each key press will be confirmed by an acoustic signal (beep).
• Release the key
• The service menu is active.
• The left rear cooking zone display (2RL) intermittently shows
"CO" ("C" and "0").
Selecting and changing menu values
• Select the Left Rear display (2RL) and with the slider, for example,
touch the last dash and C9 will then flash (% dimming of displays
not selected).
• Now press on the front left cooking zone display (2FL) where the
value that can be set is then shown.
• The selected menu item is displayed at full brightness.
• The other displays are dimmed.
• Choose the value of the menu item via the slider, for example
in this, C9, selecting the value 0 in the Front Left display (2FL).
Press at the beginning of the slider to choose to dim the inactive
displays by 10% compared to the maximum brightness of the
selected controls.
Exiting the service menu
• Exit without saving: touch the key
• Exiting with Save Settings: touch the power ON/OFF key for 2
seconds. Changes are saved.
Note: The service menu closes automatically if no operations are
performed for 2 minutes.
Note
Volume setting for beeps (e.g. when
the timer expires):
0: no button tones
1: minimum volume
2: half volume
3: maximum volume
Display brightness setting:
0: maximum brightness
....
9: minimum brightness
0: No timer animation
1: The timer is animated 10 seconds
before expiry
0: Buzz for 120 sec.
1: Buzz for 10 sec.
2: No tone
that has pulsed.
. All changes are deleted.
Publicidad
