Publicidad
Idiomas disponibles
Idiomas disponibles
6 MAINTENANCE AND ADJUSTMENT
Properly performed regular maintenance and inspection of the riding mower helps to extend its problem
free operation. Worn out or damaged components must be replaced in time. When replacing parts, use only
original spare parts, using non-original parts may damage the mower, endanger the health of the driver or
other persons and during the warranty period it voids the warranty. To order spare parts, always contact the
mower's manufacturer or an authorised service centre.
Incorrectly performed or completely neglected maintenance may lead not only to problems with the
operation of the riding mower, but may also cause injury to its operator.
All safety and protective elements that are removed during maintenance, must always be reinstalled
back in their proper location and tested for functionality.
PREPARING THE MOWER FOR MAINTENANCE
Prior to performing any inspection or maintenance, park the mower on a rigid and level surface. Then:
- engage the parking brake
- turn off the engine
- pull the key out of the ignition
- in the event that the mower was running, allow it to cool down completely
IMPORTANT INFORMATION REGARDING MAINTENANCE
PERSONAL SAFETY
Prior to starting any maintenance or servicing works, again thoroughly study all instructions, prohibitions
ƒ
and recommendations provided in
When working use suitable work clothing and work footwear. Use suitable gloves when handling the mowing
ƒ
blades or for activities where there is a risk of cuts.
Do not perform any major repairs if you do not have the necessary tools and respective knowledge or
ƒ
qualifications.
ENGINE
Prior to carrying out inspections or maintenance in the area of the engine, exhaust pipe and exhaust muffler,
ƒ
allow the mower to cool down. The engine may have a temperature of up to 115 °C and higher. There is
a danger of injury by burns!
ELECTRICAL PARTS
Before starting to work on the electrical parts or in their vicinity, disconnect the negative cable (–) of the
ƒ
battery.
FUEL AND OIL
Avoid spilling fuel, oils or other harmful substances.
ƒ
Dispose of used oil, fuel or other hazardous substances and materials in accordance with environmental
ƒ
protection regulations in force in your country.
When working with fuel or oil, never smoke, handle an open fire or light, and do not perform tasks during
ƒ
which sparks are generated.
3 WORK SAFETY AND HEALTH.
136
Publicidad
