Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
MOWING DECK IS
VIBRATING
THE MOWING DECK
DRIVE BELTS ARE
STOPPING DURING
OPERATION
THE MOWING DECK
DRIVE BELTS ARE
SLIPPING THROUGH
THE MOWING DECK
DRIVE BELTS ARE
WEARING OUT
EXCESSIVELY
MOWING DECK PROBLEMS (continued)
POSSIBLE CAUSES
Damaged or cracked blades
Damaged bearings
Loosen the mowing deck pins
One or both the mowing deck drive
belts are damaged.
The drive belts are insufficiently
tensioned
Inappropriate mowing height
A foreign object is preventing the
movement of the the belts
Damaged belt pulleys
Worn out parts of the tensioning
mechanism
The grass is too high or wet
The drive belts are insufficiently
tensioned
Worn out or damaged spring of
the mowing deck belt tensioning
mechanism
A foreign object is preventing the
movement of the belts
Damaged belt pulleys
Inappropriate mowing height
The drive belts are insufficiently
tensioned
REMEDY
Check the condition of the blades and
ƒ
sharpen or replace as necessary.
Check the condition of the bearings on
ƒ
the counter shaft.
Check the universal gear.
ƒ
Check the condition of the angular
ƒ
gearboxes and their oil level.
Check the mounting of the mowing
ƒ
deck.
Check the condition of the the belts.
ƒ
Perhaps one of the belts jumped out
of the belt pulley or was damaged.
Replace it if necessary.
Check the tension of the drive belts
ƒ
and tension them if necessary.
Check the set mowing height, adjust if
ƒ
necessary.
Check the movement of the the belts
ƒ
and remove all foreign objects or dirt if
necessary.
Recheck all the belt pulleys. Buckled
ƒ
or cracked belt pulleys may cause
problems. Replace if necessary.
Check the parts of the tensioning
ƒ
mechanism for wear and replace if
necessary.
If the grass is too tall or wet, the
ƒ
mowing deck drive belts may slip
through.
Check the tension of the drive belts
ƒ
and tension them if necessary.
Check the spring of the mowing deck
ƒ
belt tensioning mechanism Replace
the spring if it is overstretched or
damaged.
Check all the points along the route
ƒ
of the the belts. Check whether the
movement of the the belts is not
prevented by a foreign object. If yes,
remove the foreign object.
Check the belt pulleys, if they are
ƒ
damaged, replace them.
Check the set mowing height, adjust if
ƒ
necessary.
Check the tension of the drive belts
ƒ
and tension them if necessary.
156
Publicidad
