Vinten Active V4039-4980 Guia De Operadores página 16

English
General
The Vinten Active Serial Box is robustly made to high engineering standards and little attention is required
to maintain serviceability save regular cleaning.
Refer to the appropriate section in the Maintenance Manual if any defect is apparent. Adjustments and re-
pairs should be carried out only by a competent person.
Routine checks
During use, check the following:
Check that cables do not become entangled around the pan axis. Rotate the Vector 950 OE head
as necessary to free the cables.
Check that all cables are connected properly. Re-fit cables if necessary.
No further routine maintenance is required.
Cleaning
During normal use the only cleaning required should be a regular wipe over with a lint-free cloth. Dirt ac-
cumulated during storage or periods of disuse may be removed with a semi-stiff brush. Particular attention
should be paid to all the connection ports (6), (7), (11), (12).
WARNING! Disconnect power before cleaning the product.
CAUTION! 1. Use only detergent-based cleaners.
2. DO NOT use solvent or oil-based cleaners, abrasives or wire brushes to remove
accumulations of dirt as these damage the protective surfaces.
3. External electrical connection ports should only be cleaned with a semi-stiff brush
or a clean, dry air supply.
Use out-of-doors under adverse conditions may require special attention and the Active Serial Box should
be covered when not in use. Salt spray should be washed off using fresh water at the earliest opportunity.
Sand and dirt act as an abrasive and should be removed using a semi-stiff brush or a vacuum cleaner.
Adjustments
Other than periodically re-tightening the mounting screws (9), (13) no other adjustments are required.
14
Servicing