Maintenance - alesi ULTRAVISION Manual De Usuario

will be compromised and visibility will be impaired.
Be aware of trip hazards with the cable of the Ultravision Mains Converter.
Be Aware
For battery powered operation:
• Using any unapproved battery with the Ultravision system may cause damage and will void the warranty.
• Connect the battery charger power cable to a wall socket having the correct voltage. Otherwise, product damage
to the recharger or battery may result.
• Power supply voltages below 90V AC will significantly reduce the rate of recharging.
For Mains Converter Operation:
• Power supply voltages below 90Vac (to the Mains Converter Power Supply unit) will cause unpredictable genera-
tor behavior (low battery warning or no operation).

Maintenance

Warning
Inspect the Ultravision generator, battery recharging station or mains converter before each use. If there is evidence of dam-
age, do not use. Call Alesi Surgical or its local distributor for assistance.
Always turn off the Ultravision generator before cleaning.
Always unplug the battery recharging station before cleaning.
Always unplug the mains converter power supply unit and remove cable from the mains converter before cleaning.
Caution
Dispose of the Ionwand, trocar and catheter along with other operative waste materials, following the procedures for your
institution.
Be Aware
Use only detergents that are already routinely used in your hospital to clean non-sterile electrosurgical generators and ca-
bles to clean the Ultravision generator, battery recharging station and patient return adaptors. Do not apply alcohol, caustic,
corrosive, or abrasive cleaning or disinfectant compounds, solvents, or other materials that could cause damage.
Do not attempt to sterilise the Ultravision generator or patient return adaptors in any way.
Keep the Ultravision generator and battery recharging station away from liquid. These may damage internal components.
10