Ultravision™ Main Converter Option - Front Panel View - alesi ULTRAVISION Manual De Usuario

3 – Battery charging status indicators
4 – Power supply socket
1 – Power/fault indicator
The power indicator lights green when power is being correctly supplied to the recharging station. If there is a fault within the
recharging station it may still charge the batteries but it may be possible to over-charge them. This is indicated by the light
changing colour from green to red.
2 – Battery docking bay 1 and 2
The recharging station is able to recharge up to two batteries at the same time. Batteries should be inserted such that the
battery terminals engage with the terminals on the recharging station.
3 – Battery charging status indicators
When power is being supplied to the recharging station and a battery is inserted in the correct orientation the status indicator
will illuminate. The indicator will be orange until the battery is fully charged. When the battery is fully charged the light will
extinguish.
4 – Power supply socket
The battery recharging station is supplied with a power supply unit. The power supply unit has different plugs that can be
attached to the power supply unit. Select the correct plug for your local power supply.
Be aware
If the power supply unit supplied with the recharging station does not have a suitable plug that works with your local power
supply, please contact Alesi Surgical or your local distributor.
Only use the power supply unit provided with the battery recharging station. The use of other power supply units may dam-
age batteries and recharging station.
When the power/fault indicator is red there is a fault with the recharger that may damage the batteries and the re-
charger should not be used. Contact Alesi Surgical to purchase a replacement recharger.
Ultravision™ Main Converter Option – Front panel view
1. Input socket for DC Power supply jack.
2. Generator battery contact (positive)
14