Descargar Imprimir esta página

Progress PHN 1110 Manual De Instrucciones página 5

Horno empotrado
Ocultar thumbs Ver también para PHN 1110:

Publicidad

Idiomas disponibles

Idiomas disponibles

You can then set the level you want (turn the
knob anti-clockwise).
Never leave the appliance unsupervised
when preparing food with oil or fat, like chips,
for example, as oil and fat can easily catch
fire if overheated.
Safety thermostat
To prevent dangerous overheating (through
incorrect use of the appliance or defective
Before first use
Warning! Remove all packaging,
both inside and outside the oven,
before using the oven.
Before the first use, the oven should be heat-
ed while empty.
During this time, an unpleasant odour may be
emitted. This is absolutely normal. It is
caused by manufacturing residues.
Ensure that the kitchen is well ventilated.
1. Turn the oven regulator to Top and bot-
tom heating element
2. Turn the temperature regulator to 250°C.
3. Open a window for ventilation.
4. Allow the oven to run empty for approxi-
mately 45 minutes.
Once this operation is carried out, let the
oven cool down, then clean the oven cavity
with a soft cloth soaked in warm soapy wa-
ter.
Before cooking for the first time, carefully
wash the oven accessories as well.
Operation
Using the oven
Important! Do not lay aluminium foil, or
place baking trays, etc. on the oven floor, as
components), the oven is fitted with a safety
thermostat, which interrupts the power sup-
ply. The oven switches back on again auto-
matically, when the temperature drops.
Should the safety thermostat trigger due to
incorrect use of the appliance, simply remedy
the error after the oven has cooled down. If,
on the other hand, the thermostat triggers
because of a defective component, please
contact Customer service.
Cooling fan
The oven is equipped with a cooling fan,
which cools the control panel, the operating
knobs and the oven door handle. The cooling
fan is activated automatically when the oven
is in use.
The warm air is blown through the opening
next to the oven door handle.
The cooling fan shuts down when the oven
function switch is in the " 0 " position.
To open the oven door, always hold the han-
dle in the centre, until it is fully open.
the heat built up will damage the oven
surface enamel. Always place pans and pots,
ovenproof pans and pots as well as
aluminium trays on the shelf which has been
progress 5

Publicidad

loading