Notes on Handling
Cables
• Do not crush, bend, or damage the cable.
• Be careful when coiling and installing the
cable so that the cable is not subject to
strong twisting.
• Minimum coil diameter for guaranteed
cable operation: 140 mm (5
longer
26
Notes on Handling Cables / Specifications
Specifications
General
Power consumption
Operating temperature
5
/
inches) or
Storage temperature
8
External dimensions
Mass
Reference mass
Input/output connectors
Supplied accessories
Imager block attachment screws
Protection cap (1)
Operating Instructions (1)
Warranty (1)
Design and specifications are subject to
change without notice.
Approx. 3.0 W
0 °C to 40 °C (32 °F to 104 °F)
−20 °C to +60 °C (−4 °F to +140 °F)
Refer to the back of this document.
Imager block adaptor (3 m (9.8 ft))
1.9 kg (4 lb 3 oz)
Imager block adaptor (12 m (39.4 ft))
3.4 kg (7 lb 7.9 oz)
Camera body adaptor
0.4 kg (14 oz)
Imager block adaptor (excluding cable)
Approx. 0.7 kg (1 lb 8.7 oz)
8K imager block
PL mount: Approx. 1.4 kg (3 lb 1.4 oz)
E mount: Approx. 1.0 kg (2 lb 3.3 oz)
6K imager block
PL mount: Approx. 1.3 kg (2 lb 14 oz)
E mount: Approx. 0.9 kg (2 lb)
24 V IN connector (Fischer 3-pin) (1)
24 V OUT connector (Fischer 3-pin) (1)
MONITOR IN connector (BNC type) (1)
MONITOR OUT connector (BNC type) (1)
(7-683-423-04) (4)