Panasonic WV-CW960E Instrucciones De Funcionamiento página 52

WV-CW960_US 05.11.18 11:08 ページ52
Problem
The camera movement
mode (OFF, SEQ,
SORT, AUTO PAN,
PATROL, AUTO
TRACK) setting
changes.
Camera position is
different from the
preset position setting.
Picture is different from
the position setting.
Upper part of the picture
is black when the camera
is in a horizontal
orientation.
Camera suddenly starts
to pan by itself.
● Periodically check the power cord.
Power cord sheathing is
damaged.
Power cord becomes
hot during operation.
Power cord becomes
warm or hot when it is
bent or stretched during
use.
All manuals and user guides at all-guides.com
Cause and Recommended Action
• Check the self return function.
• Perform REFRESH from the special setup menu.
• Adjust the picture using the preset menu and a
scene file.
• This is caused by the camera's internal cover. It
does not indicate malfunction.
• If the cleaning function is turned on, this is normal
does not indicate
CLEANING settings.
• If the cleaning function is not turned on, this
symptom could be due to noise.
• The power cord is damaged. Continued use creates the risk of
electric shock and fire. Immediately unplug the power plug and
contact a qualified service person or system installer for servicing.
-52-
Reference Pages
malfunction. Check the
33
43
31-32
38
38
8, 11