BRAND Transferpette S-8 Instrucciones De Manejo página 59

9 Maintenance
9.1 Separate the pipetting unit from the handle
>
When assembling, the pipetting unit must be screwed counter-clock-
wise onto the handle so that it clicks into place.
>
When assembling, do not pull the pipetting unit downwards.
>
Improper handling can lead to damage.
9.2 Disassembly/cleaning
The three main components of the pipetting unit can be easily separated
and disassembled for maintenance, cleaning or replacing parts.
Changing the O-rings on the individual shafts is described in detail in the
instructions included with the replacement part.
Transferpette® S-8/-12 997208
a. Eject the pipette tips.
b. To separate, pull the pipetting unit
downward as far as possible. Only
then, turn it clockwise. After one rev-
olution, the unit no longer needs to
be pulled downward while turning.
NOTICE
Operating manual
59