BRAND Transferpette S-8 Instrucciones De Manejo página 61

Cleaning instructions
a. Clean individual shafts and pistons (only these parts) with soap solu-
tion or isopropanol. Then rinse with distilled water.
b. Allow the parts to completely dry and cool. Liquid residues in the
shafts result in deviations in accuracy.
c. Re-grease pistons with a very thin coat of the grease supplied. For the
central guide axis (Z), use only the prescribed fluorine static grease.
Removing shafts and seals for cleaning or replacement
b.
c.
M
Transferpette® S-8/-12 997208
a. Separate the pipetting unit from the
hand grip.
b. Rotate both closures of the pipette
housing cover by 90° (e.g. using a
coin) and pull off the pipette housing.
c. Place the installation tool (M) onto a
single shaft and unscrew the shaft.
Operating manual
61