B.Braun Aesculap GN324 Instrucciones De Manejo página 4

®
Aesculap
Double pedal foot switch
Double pedal foot switch GN324/GN325
Designation
High frequency surgical device
High frequency surgical device
deluxe
Nelson
Note
Information concerning other compatible Aesculap
devices is available on request and can be found in
Aesculap brochure C-304-81.
2.3 Intended use
The double pedal foot switches GN324 and GN325 are
used for activating compatible Aesculap devices for HF
surgery.
The foot controls are Class AP devices. The foot control
circuit is ignition-safe and approved for operation in
medical environments
DIN EN 60601-1.
The housing is constructed according to Protection
Type IPX8.
4
Art. no.
GN300
GN640
according to IEC /
2.4 Operating principle
The double pedal foot switches are placed on the floor
and plugged in at a compatible Aesculap device.
Pressing one of the two foot switches creates a
switching status that is recognized by the Aesculap
device and results in its activation. The operating
modes CUT (yellow button) or COAG (blue button) can
be activated.
With the double pedal foot switch GN325 (Vario
pedal), the COAG output power can be continuously
adjusted from 0–100 %.
An optional transport brace (GN327) or lateral foot
boundary (GN326) can be mounted on the double
pedal foot switch.
Note
The transport brace is available from the manufacturer
under article number GN327 and the lateral foot
boundary is available under article number GN326.