B.Braun Aesculap GN324 Instrucciones De Manejo página 5

3. Preparation
Non-compliance with the following instructions will
preclude all responsibility and liability in this respect
on the part of Aesculap.
►
When setting up and operating the product, adhere
to:
– national regulations for installation and opera-
tion,
– national regulations on fire and explosion pro-
tection.
Risk of injury and/or product
malfunction due to incorrect
operation of the electromedi-
WARNING
cal system!
►
►
Observe the assembly instructions when using the
lateral foot boundary (GN326) or the transport
brace (GN327).
►
Connect double pedal foot switch to Aesculap
device, see instructions for use of the Aesculap
device.
Adhere to the instructions
for use of any medical
device.
4. Working with the double
pedal foot switch
4.1 System set-up
4.1.1 Connecting the accessories
Risk of injury due to unap-
proved configuration using
additional components!
DANGER
►
Combinations of accessories that are not mentioned in
the present instructions for use may only be employed
if they are specifically intended for the respective
application, and if they do not compromise the perfor-
mance and safety characteristics of the products.
►
Please address your B. Braun/Aesculap partner or
Aesculap Technical Service with any inquiries in
this respect; for a contact address, see Technical
Service.
For all applied components,
ensure that their classifi-
cation matches that of the
application component
(e.g. Type BF or Type CF) of
the respective device.
5