Intended Use; Safety Precautions; Machine Data - Tennant ORBIO TECHNOLOGIES 100-Tb Manual De Operador

EN English
This manual is furnished with each new model. It provides necessary
operation and maintenance instructions.
This machine will provide excellent service. However, the best results
will be obtained at minimum costs if:
S
The machine is operated with reasonable care.
S
The machine is maintained regularly - per the machine maintenance
instructions provided.
S
The machine is maintained with manufacturer supplied or equivalent
parts.
Protect the Environment
Please dispose of packaging materials, old machine
components, and hazardous fluids in an environmentally
safe way according to local waste disposal regulations.
Always remember to recycle.

Machine Data

Please fill out at time of installation for future reference.
Model No. −
Serial No. −
Installation Date −
Declaration of Conformity for Machinery
EN
(according to Annex II A of the Machinery Directive)
Herewith declares, on our own responsibility, that the machinery
100−Tb 200−Tb
− is in conformity with the provisions of the Machinery Directive (2006/42/EC), as
amended and with national implementing legislation
− is in conformity with the provisions of the Electro magnetic compatibility Directive
2004/108/EC
and that
− the following harmonized standards or parts of these standards have been applied:
For Safety: IEC 60335−1:2010, IEC 60335−2−75:2009 and IEC 60335−2−180:2006
For EMC: IEC 55014−1:2009; IEC55014−2:1997; IEC 61000−3−2:2009; IEC
61000−3−3:2008
− the following national standards or parts of these standards have been used:
TENNANT N.V.
Industrielaan 6 5405 AB
P.O. Box 6 5400 AA
Uden − The Netherlands
Uden, 1/04/2010
TENNANT N.V.
Industrielaan 6 5405 AB
P.O. Box 6 5400 AA Uden−The Netherlands
Europe@tennantco.com www.tennantco.com
Specifications and parts are subject to change without notice.
Original Instructions. Copyright E2012, 2013 Tennant Company,
Printed in The Netherlands All rights reserved.
2
Mark Morrison
Director of International Operations
Read this manual completely and understand
the machine before operating or servicing it.

INTENDED USE

This machine is intended for commercial use only. The machine is
designed for storing, transporting on flat surfaces, and dispensing Orbio
Multi−Surface Cleaner in an indoor environment. It is not intended for
any other use.

SAFETY PRECAUTIONS

The following precautions are used throughout this manual as indicated
in their description:
WARNING: To warn of hazards or unsafe practices that
could result in severe personal injury or death.
CAUTION: To warn of unsafe practices that could result in
minor or moderate personal injury.
FOR SAFETY: To identify actions that must be followed for safe
operation of equipment.
The following information signals potentially dangerous conditions to the
operator or equipment. Read this manual carefully. Know when these
conditions can exist. Locate all safety devices on the machine. Then,
take necessary steps to train machine operators. Report machine
damage or faulty operation immediately. Do not use the machine if it is
not in proper operating condition.
WARNING: Electrical Shock Hazard.
Do Not Use Outdoors. Do Not Expose To Rain / Moisture.
Store Indoors
WARNING: Electrical Hazard.
Disconnect battery before servicing machine. Do not modify battery or
charger connections. If the power cord to the charger is damaged or
broken, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid hazard.
The appliance may only be connected to an electrical supply which has
been installed by an electrician in accordance with IEC 60364.
WARNING: Do not push on inclines.
2% maximum grade.
100−Tb/200−Tb DM20021 (7−2012)