Vision Fitness T600 Manual Del Usuario página 17

M AI N TEN AN CE
1) DO NOT use any equipm ent that is dam aged and or has worn or broken parts. Use only
2)
im portant inform ation. If unreadable or m issing, contact your VISION dealer for a
replacem ent.
3)
equipm ent as well as keeping your liability to a m inim um . Equipm ent needs to be inspected
at regular intervals.
4) Ensure that any person(s) m aking adjustm ents or perform ing m aintenance or repair of any
kind is qualified to do so. VISION dealers will provide service and m aintenance training at
our corporate facility upon request.
WARN I N G!
To rem ove power from the Treadm ill, the power cord m ust be disconnected from the wall outlet.
RECOM M EN DED CLEAN I N G TI PS
Preventative m aintenance and daily cleaning will prolong the life and look of your equipm ent.
1) Use a soft, clean cotton cloth. DO NOT use paper towels to clean surfaces on the treadm ill.
Paper towels are abrasive and can dam age surfaces.
2) Use a m ild soap and dam p cloth. DO NOT use am m onia based cleaner or alcohol. This will
cause discoloring of the alum inum and plastics it com es into contact with.
3) Do not pour water or cleaning solutions on any surface. This could cause electrocution.
4) Wipe the console, heart rate grip, handles and side rails after each use.
5) Brush away any wax deposits from the deck and belt area. This is a com m on occurrence
until the wax is worked into the belt m aterial.
6) Be sure to rem ove any obstructions from the path of the elevation wheels including power
cords.
For cleaning touch screen displays, use distilled water in an atom izer spray bottle. Spray distilled
water onto soft, clean, dry cloth and wipe display until clean and dry. For very dirty displays,
adding vinegar is recom m ended.
CAUTI ON !
Be sure to have proper assistance to install and m ove the unit in order to avoid injury or dam age
to the treadm ill.
16
M AI N TEN AN CE SCHEDULE
ACTI ON
Unplug the unit. Clean entire m achine using water and a
m ild soap or other approved solution (cleaning agents
should be alcohol and am m onia free).
Inspect the power cord. If the power cord is dam aged,
contact Custom er Tech Support.
any other area where it can becom e pinched or cut during
storage or use.
Unplug the treadm ill and rem ove the m otor cover. Check for
debris and clean with a dry cloth or sm all vacuum nozzle.
WARN I N G : Do not plug the treadm ill in until the m otor cover
has been reinstalled.
For touch screen consoles, enter service m ode and select
indicated.
Clean IR sensors (located on console m asts) with a cotton
swab and rubbing alcohol.
DECK AN D BELT REPLACEM EN T
One of the m ost com m on wear and tear item s on a treadm ill is the deck and belt
com bination. If these two item s are not properly m aintained they can cause dam age
to other com ponents. This product has been provided with the m ost advanced
m aintenance free lubricating system on the m arket.
WARN I N G!
Do not run the treadm ill while cleaning the belt and deck. This can cause serious
of the belt and deck with a clean cloth. The user can also wipe under the belt 2 inches
(~51m m ) on both sides rem oving any dust or debris. The deck can be flipped and
reinstalled or replaced by an authorized service technician. Please contact Vision
Fitness System s for m ore inform ation.
FREQUEN CY
DAILY
DAILY
DAILY
QUARTERLY
QUARTERLY