Vision Fitness T600 Manual Del Usuario página 7

1
•
• Open HARDWARE FOR STEP 1.
• Attach LEFT CON SOLE M AST (3) to BASE FRAM E (2) using 4 BOLTS (B)
and 4 FLAT WASHERS (C) from the top and bottom .
• Attach RI GHT CON SOLE M AST (6) to BASE FRAM E (2) using 4 BOLTS (B)
and 4 FLAT WASHERS (C) from the top and bottom .
NOTE: Be careful not to pinch wires while attaching the handlebar.
A
B Bolt
C Flat Washer
A
3
B
C
6
M OTOR COVER (1).
2
8
8
1 6
2
• Open HARDWARE FOR STEP 2.
2
• Connect the HEART RATE GRI P WI RE (12) , discard the wire tie, and tuck the cables
inside the LEFT HAN DLE BAR (8) and slide into the CON SOLE BASE (9).
• Connect the HEART RATE GRI P WI RE (13 ), discard the wire tie, and tuck the cables
inside the RI GHT HAN DLE BAR (10) and slide into the CON SOLE BASE (9).
• Attach HAN DLEBARS (8 & 10) to CON SOLE BASE (9) using 4 BOLTS (E) and 4
CURVED WASHERS (F).
E Bolt 4
F Arc Washer 4
9
12
F
E
8
13
10