Brief Instructions - Multiplex EasyGlider 4 Instrucciones De Montaje

# 1 3272

BRIEF INSTRUCTIONS

The RTF version of the EasyGlider 4 is factory-assembled, and virtually ready to fly. Numerous procedures which are described in the
building instructions are already completed for you, with the result that the model can be ready for the air in very short order.
Tools required
Screwdriver for M5 slot-head screw
It is essential to observe all the safety notes and tips!
Before completing and flying the model please read through the building instructions and the operating instructions for all
the components included in the set.
Take particular care over reading the instructions supplied with your SMART SX radio control system!
1. Check that the set contents are complete by referring to the Parts List.
2. Install the tailplane and fin
See paragraphs 2.12 and 2.13 of the building instructions and Figs. 18 - 21. Check that the servos are at neutral (centre)
when you fit the tail panels.
3. Assemble the model
See paragraph 5 of the building instructions and Fig. 33.
4. Set the correct Centre of Gravity
See paragraph 8 of the building instructions and Fig. 34.
5. Go flying with the EasyGlider 4
See paragraphs 9 and 10 of the building instructions and Figs. 35 - 40.
Parts List RTF EasyGlider 4
No. Quantity
1 1
2 1
3 1
4 1
5 1
6 1
7 1
8 1
9 1
10 1
11 1
12 1
13 1
14 1
15 1
# 26 4333
BRIEF INSTRUCTIONS
The RR+ version of the EasyGlider 4 is factory-assembled, and virtually ready to fly. Numerous procedures which are described in the
building instructions are already completed for you, with the result that the model can be ready for the air in very short order.
Essential / recommended accessories:
Battery charger
Power Peak B6 12V / 230V charger
Tools required
Screwdriver for M5 slot-head screw
# 1 3273
Description
EasyGlider 4 building instructions
Complaint processing form
Fuselage with servos, power set and receiver
LiPo battery, ROXXY EVO 3-2200 20C (M6)
L.H. wing with servo
R.H. wing with servo
Tailplane
Fin
M5 plastic screw
Allen key, 1.5 mm A/F
Hook-and-loop tape, hook
Hook-and-loop tape, loop
Foam block battery retainer
Multiplex SMART SX radio control system
MULTIcharger L-703 EQU battery charger
Order No. 30 8561
17