Descargar Imprimir esta página

identités 826172 Manual De Instrucciones página 8

Rollator 3 ruedas delta aluminio

Publicidad

Idiomas disponibles

Idiomas disponibles

Lubricate the wheels with a little oil if they squeak.
Periodically check the wear and strength of all screws and bolts.
Replace all broken, damaged or worn parts immediately.
Check that the brakes are working before each use.
Check the parking brakes by pushing the handles into the locked position, then trying to push the rollator.
If the brakes do not completely block the wheels, the brakes must be adjusted.
Checklist :
To keep the rollator in good condition, check before each use, and check regularly as follows
Check the item
Clip and knob for height adjustment
Structural weld at wheels
Cleanliness
Screws and fasteners
Stability of frame and backrest
Condition of seat
Brakes
CHANGED OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When transferring
the rollator, remember to hand over all the necessary technical documents to the new user. Beforehand, the product must be
inspected by an authorised specialist.
RECYCLING
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If you wish to
carry out recycling for yourself, ask your local waste management company for disposal guidelines.
STORAGE
Failure to observe the storage conditions may lead to deterioration of the product and thus to the risk of serious
injury.
Do not store your rollator for an extended period of time near a heat source or in the sun (e.g. behind a window or near a
radiator) or near a cold source.
Keep away from all flames and sources of sparks.
Observe the conditions for storing and stowing your rollators :
In a dry and temperate place
Protect your rollator by packaging it from dust, corrosion (e.g.abrasive elements, sand, sea water, salty air).
Store all removed parts together in the same place (or locate them if necessary) to avoid mixing them with other products
when reassembling.
All components must be stored without any load (do not place any objects that
TECHNICAL SPECIFICATIONS
Overall dimensions
Weight
Maximum basket load
Maximum load
PERIOD OF USE
The expected life span of this product is 3 years under normal use, safety and maintenance conditions. Beyond this period, the
product can be used for as long as it is still in good condition.
WARRANTY
This product is guaranteed for two years from the date of purchase by the user. IDENTITIES will provide replacement parts for
any part that has broken due to a manufacturing, design or material defect. Contact the distributor from whom you purchased
DMI-F-11_Annexe 2_Notice.2
V2-15/12/2022
Anytime
X
X
Length. 61 x width. 56 x height. 83 / 93 cm
4,7 kg
5 kg
125 kg
Weekly
Monthly
X
X
X
X
Yearly
X
Page 8 sur 13

Publicidad

loading