Descargar Imprimir esta página

Sartorius Gold & Carat II Line GL822I-2 Serie Instrucciones De Manejo página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 129
6
Getting Started
6.1
Installing the Power Supply
Unit
6.1.1
Assembling the Power Supply Unit
Item number
Power supply unit YEPS01-15VOW
on packaging
with connection cable and coun-
try-specific power plug adapters
(packed in PE bag with printed
country identification, e .g . EU)
YEPS01-PS8
USA and Japan (US+JP), Europe and
Russia (EU+RU), Great Britain (UK),
India (IN), South Africa (ZA),
Australia (AU), China (CN)
YEPS01-PS9
Argentina (AR), Brazil (BR),
Korea (KR)
YEPS01-PS10
China (CN)
Procedure
Push the power plug adapter as far as you can until it
t
clicks into place.
Check whether the power plug adapter is securely
t
locked in place by pulling it gently.
If the power plug adapter does not move: It is locked
y
in place.
Select the country-spe-
t
cific power plug adapter.
The power plug adapter
must be suitable for use
with the wall outlet at
the installation site.
Insert the power plug
t
adapter into the power
supply unit. The grooved
button must be facing
upwards.
6.1.2
Dismantling the Power Plug Adapter
Procedure
6.2
Connecting the Power Supply
Procedure
WARNING Severe injuries caused by using
t
defective power supply cables! Check the power
supply cable for damage, e.g. cracks in the insulation.
If required: Contact Sartorius Service.
t
Check whether the country-specific power plug
t
matches the power connections at the installation
site.
If required: Replace the country-specific power
t
plug adapter.
NOTICE Damage to the device due to excessive
t
input voltage! Check whether the voltage specifica-
tions on the manufacturer's ID label match those of
the power supply at the installation site.
If the input voltage is too high: Do not connect
t
the device to the power supply.
Contact Sartorius Service.
t
Connect the right angle plug to the "Power Supply"
t
connection.
Connect the mains plug to the wall outlet (mains
t
voltage) at the installation site.
The [BOOTING] display appears in the operating
y
display.
The device performs a self-test.
y
Operating Instructions Gold&Carat II Line
Getting Started
Press the grooved but-
t
ton from above and pull
back on the power plug
adapter.
Push the power plug
t
adapter out of the
power supply unit and
remove it.
15

Publicidad

loading