Pioneer PDP-42MVE1 Manual De Instrucciones página 30

DIVIDER
Set the 4-25 video wall.
Example: Setting "4"
On "DIVIDER" of "VIDEO WALL" menu, select "4".
VIDEO WALL
DIVIDER
POSITION
DISP. MODE
AUTO ID
SCREEN
P. ON DELAY
ABL LINK
REPEAT TIMER
SEL. ADJ.
Information
DIVIDER settings
OFF, 1: 1 Screen (Matrix display function does not work)
4: 4 Screens (2×2 video wall)
9: 9 Screens (3×3 video wall)
16: 16 Screens (4×4 video wall)
25: 25 Screens (5×5 video wall)
* When you select 4-25, set the VIDEO WALL
POSITION.
VIDEO WALL POSITION
Set the position of each display.
Example: Setting "4"
On "VIDEO WALL" menu, select "POSITION", then press
the MENU/SET button.
The "VIDEO WALL POSITION" screen appears.
Select "NO. 4" of "POSITION NO.".
VIDEO WALL POSITION
POSITION NO.
ADJ.
Information
VIDEO WALL POSITION settings
1 Screen: There is no need to set POSITION.
4 Screens
NO. 1
NO. 2
NO. 4 NO. 3
16 Screens
NO. 16 NO. 17 NO. 18 NO. 19
NO. 20 NO. 21 NO. 22 NO. 23
NO. 24 NO. 25 NO. 26 NO. 27
NO. 28 NO. 29 NO. 30 NO. 31
: 4
: NORMAL
: OFF
: OFF
: OFF
: OFF
EXIT RETURN
4
EXIT RETURN
9 Screens
NO. 7 NO. 8 NO. 9
NO. 10 NO. 11 NO. 12
NO. 13 NO. 14 NO. 15
25 Screens
NO. 32 NO. 33 NO. 34 NO. 35 NO. 36
NO. 37 NO. 38 NO. 39 NO. 40 NO. 41
NO. 42 NO. 43 NO. 44 NO. 45 NO.46
NO. 47 NO. 48 NO. 49 NO. 50 NO. 51
NO. 52 NO. 53 NO. 54 NO. 55 NO. 56
DISP. MODE
Select the screen mode from between two options
(NORMAL, ADJUST).
Example: Setting "ADJUST"
On "DISP. MODE" of "VIDEO WALL" menu, select
"ADJUST".
VIDEO WALL
DIVIDER
POSITION
DISP. MODE
AUTO ID
SCREEN
P. ON DELAY
ABL LINK
REPEAT TIMER
SEL. ADJ.
Information
DISP. MODE settings
NORMAL: Combines enlarged screens and creates
multiple screens.
ADJUST: Corrects misalignment of combined screen
portions and creates multiple screens
AUTO ID
This feature automatically sets the ID numbers of multiple
displays connected to each other.
Example: Setting "ON"
Set the ID number for the No. 1 display on ID NUMBER
menu.
On "AUTO ID" of "VIDEO WALL" menu, select "ON",
then press the MENU/SET button.
AUTO ID
AUTO ID
1 2
4 3
WIRED CABLE
CONNECTION TURN
ADJ.
Information
AUTO ID settings
ON: Enables Auto ID function. In the case shown below,
display 1 will be set as ID 1, display 2 as ID2, etc.
This can be set only when a 2×2 or 3×3 video wall is
selected.
REMOTE
OUT
No.1 No.2
REMOTE
No.4 No.3
IN
REMOTE
Display 1
REMOTE
No.1 No.2
REMOTE
OUT
No.4 No.3
REMOTE
IN
Display 4
OFF: Disables Auto ID function.
: 1
: ADJUST
: OFF
: OFF
: OFF
: OFF
EXIT RETURN
: ON
1 2 3
8 9 4
7 6 5
EXIT RETURN
No.1 No.2
REMOTE
No.4 No.3 OUT
IN
Display 2
OUT
No.1 No.2
REMOTE
No.4 No.3
IN
Display 3
25
En