Publicidad
Idiomas disponibles
Idiomas disponibles
Description
Model 7886 series pumps consist of a
reciprocating air motor and a double-acting
pump tube.
Pump motor does not come in contact
with product being pumped. Motor is
protected from product contamination and
allows motor separation without pump
tube disassembly.
Pump tubes are designed to enable
delivery of a variety of materials.
A bung adapter, 2 in NPTF (e), is part of
the pump and allows operation directly from
original drums or bulk containers.
Pump model 7886-A5 is designed with a
pump tube length to accommodate
55 gallon
drums.
or 200/205 liter
NOTE
Model can be hoist-mounted
(† Table 4).
Air motor specifications
Piston diameter
Stroke
Air inlet
Maximum air pressure
Pump tube specifications
Material outlet
Maximum material pressure
Maximum delivery
Displacement per cycle
Accessories
Model
Air hose
7886-A5
317811-5
1)
Cover contains inspection/fill port.
Hoists
Model
Description
Hoist model
7886-A5
Single post
2741-4
2742-4
2743-4
Dual post
7818-F5
1)
Requires adapter (Attaches plate to inlet of pump)
2)
Included with hoist.
6
4
/
in (108 mm)
1
4
4 in (102 mm)
3
/
in NPTF (i)
4
200 psi (14 bar)
1 in NPTF
2 200 psi (152 bar)
14 gal/min (53 l/min)
9.62 in
3
(157.6 cm
3
)
Cover
Union
318040-4 (55 gal)
321155
322590-4 (55 gal)
1)
338984 (200/205 l)
Adapter plate
Follower plate
35 lb
322593
–
322593
324610
–
324610
--
--
Table 1
Table 2
Table 3
Muffler
324170
Table 4
Follower adapter
1)
400 lb
327247
330976
327247
330976
327247
330976
327690
2)
330976
Publicidad
