YASKAWA LA500 Manual De Instrucciones página 32

1 English
The wheelie bin symbol on this product, its manual, or its packaging identifies that you must
recycle it at the end of its product life.
You must discard the product at an applicable collection point for electrical and electronic
equipment (EEE). Do not discard the product with usual waste.
◆
European Standards
The CE Mark identifies that the product meets environmental and safety standards in the
European Union. Products manufactured, sold, or imported in the European Union must display
the CE Mark.
European Union standards include standards for electrical appliances (Low Voltage Directive),
standards for electrical noise (EMC Directive), and standards for machinery (Machinery
Directive).
This product displays the CE Mark in accordance with the Low Voltage Directive, the EMC
Directive, and the Machinery Directive.
European Directive
CE Low Voltage Directive Compliance
2014/35/EU
EMC Directive
2014/30/EU
Machinery Directive
2006/42/EC
Restriction of the use of certain hazardous substances
(RoHS)
2011/65/EU
The customer must display the CE Mark on the final device containing this product. Customers
must verify that the final device complies with EU standards.
European Directive
EU ErP Directive
2009/125/EC
■
CE Low Voltage Directive Compliance
It has been confirmed that this product complies with the CE Low Voltage Directive by
conducting a test according to EN 61800-5-1:2007.
The following conditions must be satisfied for machines and devices incorporating this product
to comply with the CE Low Voltage Directive.
32
Figure 1.9 CE Mark
Table 1.6 Harmonized Standards
Table 1.7 Other Applicable Standards
YASKAWA CR700 series meets the requirements for IE2 efficiency according
to the European regulation 2019/1781.
The losses and the efficiency class were determined in accordance with EN
61800-9-2
YASKAWA TOMPYEULA5001C LA500 Installation and Operation Instructions
Harmonized Standard
EN 61800-5-1
EN 61800-3
• EN ISO 13849-1:2015 (PL e (Cat.III))
• EN 62061 (SILCL3)
• EN 61800-5-2 (SIL3)
EN IEC 63000
Applicable Standards