Kohler K-97630 Instrucciones De Instalación página 20

16. Install the Side Wall Panels with Joints
NOTE: Use silicone adhesive if the wall panels are being installed over tile. For all other applications, use the adhesive
type specified in the instructions included with the shower walls.
NOTE: Bracing may be needed to hold the wall panel in place depending on the rough wall material and adhesive being
used.
Apply adhesive to the side wall panel in a circular pattern. The beads of adhesive should be 5" (127 mm) to 7" (178
mm) apart.
Apply a bead of adhesive along the edges of the wall panel 3/4" (19 mm) from the edge.
Move the wall panel into place at a slight angle, pressing the wall panel into the corner joint, if installed.
Push the wall panel against the rough wall. Press firmly and evenly across the entire wall panel. The wall panel should
contact the rough wall along the entire area.
1484881-2-A
Shims
20 Kohler Co.