Kohler K-97630 Instrucciones De Instalación página 5

1. Prepare the Site
2x4 Bracing
65"
(1651 mm)
11" (279 mm) Min
15" (381 mm) Max
IMPORTANT! Waterproof wallboard backing material is recommended.
Install the rough plumbing for the bath and shower components.
Check the studs for plumb. Studs should be within 3/8" (10 mm) of plumb. Shim if necessary.
Determine the height of the enclosure and the locker unit.
Install 2x4 bracing where the locker unit will be placed following the dimensions shown above.
Install backing support for all accessories that require additional support. Refer to the installation guides packed with
each product for specific installation needs.
Install wallboard backing material over the locker unit opening with the same dimensions as the 2x4 bracing cutout.
Kohler Co.
K-97630: 9" (229 mm)
K-97631: 14-1/2" (368 mm)
Wallboard Backing
65"
(1651 mm)
11" (279 mm) Min
15" (381 mm) Max
5
K-97630: 9" (229 mm)
K-97631: 14-1/2" (368 mm)
1484881-2-A