Kohler K-97630 Instrucciones De Instalación página 19

15. Prepare the Seam Joints
Seam Joint
Installing with Corner Joints
Determine the required length of the seam joint by measuring the width of the side wall panel, allowing enough length
to extend 7/8" (14 mm) into the channel of the corner joint.
NOTE: To trim the seam joint, a small rotary tool with a cutting wheel is recommended.
Cut the seam joint to the required length.
Trim the end of seam joint where the seam joint will meet the corner joint as shown.
Installing without Corner Joints
Determine the required length of the seam joint by measuring the width of the side wall panel.
NOTE: To trim the seam joint, a small rotary tool with a cutting wheel is recommended.
Cut the seam joint to the required length.
Kohler Co.
7/8" (14 mm)
19
Side View
Corner Joint
Seam Joint
1484881-2-A