cecotec DRUMFIT X-BIKE 3000 NEO PRO Manual De Instrucciones página 25

ESPAÑOL
11. COPYRIGHT
Los derechos de propiedad intelectual sobre los textos de este manual pertenecen a CECOTEC
INNOVACIONES, S.L. Quedan reservados todos los derechos. El contenido de esta publicación no
podrá, ni en parte ni en su totalidad, reproducirse, almacenarse en un sistema de recuperación,
transmitirse o distribuirse por ningún medio (electrónico, mecánico, fotocopia, grabación o
similar) sin la previa autorización de CECOTEC INNOVACIONES, S.L.
48 DRUMFIT X-BIKE 3000 NEO PRO
1. PARTS AND COMPONENTS
Fig. 1
1. Cushioned backrest
2. Rear handlebar
3. Saddle post
Height-adjustment knob
4.
5. Twisting disc
6. Rear stabiliser
7. Handlebar
Tension adjustment knob
8.
9. Main Frame
10. Spring pin
11. Pedal
12. Front stabiliser
13. Display
14. Hexagonal screws (x4) and spring washers (x4)
15. Hexagonal bolts (x4)
16. Spring pin (x1)
17. Allen spanner (x1) and spanner (x1)
18. Locking knob (x1)
Please note
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
ENGLISH
DRUMFIT X-BIKE 3000 NEO PRO 49