Bosch GTS1041A Instrucciones De Funcionamiento página 10

18. RIP FENCE
Exclusive Self-Aligning, Squarelock rip fence can
be easily moved or locked in place by simply rais-
ing or lowering lock handle.
19. SMART GUARD SYSTEM
Consists of three key elements: Adjustable (3
position) Riving Knife, Anti-Kickback Pawls, and
Barrier Guard Device. All of these are part of a
modular system that requires no tools to as-
semble or disassemble. This Guard System must
always be in place and working properly for all
through-cutting cuts.
20. SMART GUARD SYSTEM STORAGE
When not in use or for transportation, the Main
Barrier Guard and Anti-Kickback Pawls can be
stored under the right side table extension.
21. TABLE INSERT
Removable for removing or installing blade or
other cutting tools, to adjust or store the riving
knife, and to reset the Active Response Technol-
ogy™ injury mitigation system.
Fig. 2a
14 15
1600A009XC 09-15.indb 10
Fig. 2c
16 17
22. TABLE INSERT LOCK
Rotates to retain or eject the table insert in the
table.
23. PUSH STICK
Allows you to rip smaller pieces of stock with a
greater level of safety.
24. PUSH STICK STORAGE
On tool storage location for the push stick.
25. INFORMATION PANEL
The system of indicator LEDs and the NFC fea-
ture that inform the operator about the tool's cur-
rent status
26. BYPASS SWITCH
The control that allows the saw user to disable
the Active Response Technology™ injury mitiga-
tion system for a single cycle of the power switch.
A hole is provided to padlock this switch so that
only authorized users can disable the Active Re-
sponse Technology™ system.
Fig. 2b
16
10
20 34
9/14/15 1:51 PM