Publicidad
Idiomas disponibles
Idiomas disponibles
3. AC/DC Adapter (Optional accessories)
Model
Input power source
Output voltage
Operating temperature range
Weight
Electronic control
○ Soft-start
○ Brake function
BSL36B18; Small counter-force
ET36A; Large counter-force
–
Please be aware that the counter-force of the brake differs depending on the battery being used.
○ Overload protection
This protection feature cuts off the power to the motor in the event of overloading of motor or a conspicuous
reduction in rotational speed during operation.
When the overload protection feature has been activated, the motor may stop.
In this case, release the tool switch and eliminate causes of overloading.
After that you can use it again.
○ Overheat protection
This protection feature cuts off the power to the motor and stops the power tool in the event of overheating of motor
during operation.
When the overheat protection feature has been activated, the motor may stop.
In this case, release the tool switch and cool it down in a few minutes.
After that you can use it again.
○ Rotation speed changeover function (Auto Switch mode / High Torque mode)
NOTE
Precaution for continuous cutting
When using ET36A, if the switch is repeatedly switched ON and OFF during a short period of time while in the Auto
Switch mode, the tool will be stopped early by the overheat protection feature. When that happens, using the High
Torque mode is recommended.
ET36A
Single phase: AC 120 V 60 Hz
36 V
32°F (0°C)–104°F (40°C)
Adapter : 1.8 lbs. (0.8 kg)
Box : 2.6 lbs. (1.2 kg)
English
15
Publicidad
