Metabo HPT C 3607DB Manual página 31

2. AC/DC adapter
Problem
The adapter's error lamp is blinking
red and the tool does not operate
when switched on.
The adapter's error lamp rapidly
blinks red and the motor does not
operate when the tool is switched on.
During protective operation, the LED
will blink differently for AC/DC adapter
use and battery use.
Possible Cause
Output is suspended because the tool
or the AC/DC adapter is overheated.
Output is suspended because the tool
is overloaded.
–
Possible Solution
Allow the tool and AC/DC adapter to
sufficiently cool down.
Remove the cause of the overload.
This is not a malfunction.
English
31