Publicidad
Idiomas disponibles
Idiomas disponibles
English
○ For mounting saw blade, the concave side of washer
(A) must be fitted to the saw blade side. (See Fig. 16)
Washer (B)
Hexagonal
flange bolt
Concave side
(3) If washer (A) was removed, install it on the main unit
first. Next, mount the saw blade on the spindle, and
finally, affix washer (B).
(4) To assure proper rotation direction of the saw blade,
the arrow direction on the saw blade must coincide
with the arrow direction on the saw cover.
(5) Using the fingers, tighten the hexagonal bolt retaining
the saw blade as much as possible. Then depress the
lock lever, lock the spindle, and thoroughly tighten the
hexagonal flange bolt.
(6) Confirm that the lock lever is in the original position.
CAUTION
After mounting the saw blade, reconfirm that the
lock lever has returned to its original position.
3. Check performance of lower guard
WARNING
Make absolutely sure that the lower guard is not
fixed. Also, check and see if it can move
smoothly. If the saw blade is kept exposed,
injury can result.
The lower guard (refer to Fig. 6) serves to protect your
body from coming into contact with the saw blade. Make
absolutely certain that the cover smoothly performs to
cover the saw blade. If the lower guard should not move
smoothly, never use it without repairing it.
In such a case, get in touch with the store where you
bought the power tool or the metabo HPT AUTHORIZED
SERVICE CENTER for necessary repair.
20
Saw blade
Washer (A)
Fig. 16
4. Check for proper operation of the brake
This power tool features an electric brake that
functions when the switch is released. Before use,
ensure that the electric brake functions properly.
If it does not, bring the tool to a metabo HPT
AUTHORIZED SERVICE CENTER.
5. Prepare a wooden work bench (Fig. 17)
Since the saw blade will extend beyond the lower
surface of the lumber, place the lumber on a work
bench when cutting. If a square block is utilized as a
work bench, select level ground to ensure it is
properly stabilized. An unstable work bench will result
in hazardous operation.
Lumber
Work bench
CAUTION
To avoid possible accident, always ensure that
the portion of lumber remaining after cutting is
securely anchored or held in position.
6. Using hook
WARNING
To reduce the risk of injury from the saw falling
on operators or bystanders, make sure the saw
is supported securely when using the hook to
hang the saw.
Base
Saw blade
Fig. 17
Publicidad
