Publicidad
Idiomas disponibles
Idiomas disponibles
○ If the rechargeable battery level is extremely low,
charging the rechargeable battery takes priority, and
USB charging is temporarily stopped. USB charging
automatically resumes once the battery level has
reached a preset level.
PRIOR TO OPERATION
WARNING
To avoid serious accident, ensure the switch is
in the OFF position, and pull out the battery.
1. Check the work area environment
Check the work area to make sure that it is clear of
debris and clutter.
Clear the area of unnecessary personnel. Ensure that
lighting and ventilation is adequate.
2. Changing saw blades
WARNING
● Use the hex. bar wrench 5 mm that is supplied
with the power tool. Do not use other tools as
this may result in over-tightening or insufficient
tightening of the hexagonal flange bolt that holds
the blade in place causing accidents.
● Perform replacement of the saw blade on a
stable surface or floor.
CAUTION
● Use only sharp, undamaged saw blades. Do not
use saw blades that are cracked or that have
changed their shape.
● Never touch the saw blade immediately after use.
The metal is hot and can easily burn your skin.
(1) Depress the lock lever, lock the spindle, and remove
the hexagonal flange bolt and washer (B) with the
hex. bar wrench 5 mm (Fig. 14)
Hex. bar wrench 5 mm
Lock lever
(2) While holding the end of the lower guard to keep the
lower guard fully retracted into the saw cover, remove
the saw blade. (Fig. 15)
Saw blade
NOTE
○ Before installing the saw blade, thoroughly remove
any sawdust which has accumulated on the spindle,
hexagonal flange bolt, and washers.
English
Loosen
Fig. 14
Lower guard
Saw cover
Fig. 15
19
Publicidad
